ABS is a styrene-acrylonitrile (SAN) copolymer modified by polybutadiene rubber

Product
Acrylonitrile Butadiene Styrene
Message Category
UserPic
Kokel, Nicolas
11/18/2026 1:50 PM



Custom CNC Machining of ABS Plastic Parts | Source: Allied Metal Solutions - What is ABS Plastic?

Acrylonitrile Butadiene Styrene (ABS) is a hard, tough, heat-resistant engineering thermoplastic — essentially a styrene-acrylonitrile (SAN) copolymer modified by polybutadiene rubber — that combines the resilience of polybutadiene with the hardness and rigidity of polyacrylonitrile and polystyrene. It is a two-phase polymer blend: a continuous SAN phase provides rigidity, hardness and heat resistance, while submicroscopically fine polybutadiene rubber particles uniformly distributed in the SAN matrix provide toughness through rubber toughening. The three monomers contribute a deliberate balance of properties: the butadiene units impart impact strength, the acrylonitrile units afford heat and chemical resistance and rigidity, and the styrene units give the copolymer its stiffness, processability and characteristic shiny, impervious surface. Composition can vary from 15% to 35% acrylonitrile, 5% to 30% butadiene and 40% to 60% styrene, and by adjusting the ratios ABS is prepared in grades spanning high and medium impact, high heat resistance, electroplatable, flame-retardant and transparent (MABS) variants.

Continue reading here.

#abs  #san  #styreneacrylonitrile  #butadienerubber  #polybutadienee  #sbr  #polyacrylonitrile  #polystyrene  #impactstrength  #heatresistance